Garage Door Springs – How to Identify, Repair, and Replace

Are you having trouble with your garage door? Understanding garage door springs is crucial in identifying, repairing, and replacing issues. In this blog post, we’ll cover all aspects of garage door springs so you can confidently tackle the problem.


What You Need to Know About Garage Door Springs 

Garage door springs are often used to counterbalance the weight of a heavy garage door and make it easy to open manually. Springs come in two main types: torsion springs, which are found on the door itself and mounted along its width, and extension springs, installed above the door’s horizontal track.

When Should You Identify Garage Door Springs? 

Although most garage doors operate smoothly, there are several warning signs that indicate it’s time to identify your springs. Here are a few things to look out for:

  • Your garage door opens and closes slowly or erratically
  • The springs have broken or become frayed
  • The cables have come off their drums
  • There is rust or corrosion on the springs
  • The door makes loud noises when opening and closing.

How to Identify Your Garage Door Springs 

Before you can repair your garage door springs, you need to be able to identify them properly. Torsion springs are typically located at the top of the door and are typically mounted above the track on a metal rod. Extension springs are found near the top of the door, connected to either side with cables.

Repairing Garage Door Springs 

If you’re able to identify your garage door springs correctly and you have identified one or more of the warning signs listed above, you may be able to repair your springs with a few simple tools.

  • Gather the necessary tools. You’ll need a socket wrench, a vise grip, and an adjustable wrench.
  • Make sure the door is closed and locked before you begin repairs.
  • If possible, remove any rust or corrosion from the springs.
  • Replace any broken or frayed cables.
  • Tighten loose hardware and lubricate all moving parts with oil.
  • Test the door to make sure it’s working smoothly before you close up the garage.

Replacing Garage Door Springs 

If repair isn’t an option, it’s time to replace your springs. To do this, you’ll need to:

  • Measure the size and weight of the door to determine the correct replacement spring.
  • Gather the necessary tools – including a socket wrench, a vise grip, an adjustable wrench, and a ladder.
  • Make sure the door is closed and locked before you begin.
  • Unhook the old springs and remove them from the door.
  • Install the new springs in their place and reconnect them to the cable drums.
  • Adjust the tension on the replacement springs as needed.
  • Test the door to ensure it works properly before closing the garage.

Garage Door Repair in Carmichael and Sausalito

If you’ve tried to identify, repair, or replace your garage door springs but haven’t succeeded, it may be time to call a professional.

Source Link: